[China Glass Net] The scratch-resistant layer on the outside of the film is used to prevent damage to the film. However, care must be taken when cleaning the glass surface to prevent damage to the already attached diaphragm.
1. Use a common household glass cleaner or simple soapy water.
2, do not use any materials containing abrasives, such as: baking soda, etc., be careful not to use sharp tools that may cut or scrape the diaphragm.
3. Dip the cleaning solution with a clean soft towel or artificial sponge.
4. Dry the glass with a soft cloth or rubber scraper.
Houseplant
In general, the use of a glass film does not have any adverse effect on most indoor plants. After the film is applied, the plants may slowly grow and bloom to adjust themselves. In some cases, the growth of plants is continuous, and long-term direct sunlight will cause wilting, and the plants will actually thrive after the filming.
What is the impact on the growth of the plant, an experiment before the film is applied, and the plant is moved to a less illuminated area of ​​the room to determine what potential effects the plant may have. In addition, for some exotic flowers, it is recommended to refer to the practice of local botanical gardens.
Film for the outside of the glass
Sometimes, it is necessary to apply a film on the outside of the glazing, which may be caused by various reasons. Sometimes, because some fixtures, devices, or other things are too close to the glazing (it is difficult to move between them and the glass), it is very difficult to access the inside of the glazing. Another reason may be due to the fact that the glass four composite structure, such as laminated glass, causes cracks in the glass when the film is coated on the inside due to the temperature difference.
Because such glass films are subject to harsh weather conditions, and their location is easy to be treated harshly, or their life is limited due to careless glass cleaning. In general, the quality assurance period of the product will be shortened in this case.
Blinds
Because the design of the blinds itself is simple, any film attached looks like a bare foundation at a certain stage. In addition, the blinds expose one side of the glass and the outside to the outside, which can cause the glass film to peel off or erode along the edges. For this reason, it is necessary to use an external dedicated diaphragm. It must be told to the end user that it is impossible to obtain the same life of the film on the glass as the film attached to the inner surface.
Plastic film
Glass foils should not be applied to acrylic or polycarbonate windows unless specifically designed for this purpose. These are all plastic sheet products that have potential gas escaping. Thermal radiation and visible light from the sun cause "gas escaping" to relax the chemical material or to relax the chemical material or to absorb moisture from the plastic. This escaping gas interferes with the glue system of the glass film and causes foaming between the plastic and the glass film. It is also worth noting that many glass film adhesive systems will have a permanent bond when applied to plastic. If so, the film must be torn off, but it is impossible to do so without damaging the plastic surface.
0.6Mm Black Pvc Leather,Black Pvc Leather With French Terry,Pvc Synthetic Leather For Car Seat,Pu Leather For Car Use Universal
Shaoxing Weirui Import And Export Co.,Ltd , https://www.weiruileather.com